Modern technology gives us many things.

5 Reasons to Upgrade to the Nvidia RTX 3050

0


Released in January 2022, Nvidia’s GeForce RTX 3050 boasts 8GB of GDDR6 VRAM. This rivals the RTX 3060 Ti by offering the same memory size with a higher boost clock speed and a lower power requirement, albeit with a much slower memory bus and lower overall bandwidth (there’s always a catch!).

Priced at $249, the RTX 3050 sets the ground for an affordable graphics card that’s capable of delivering ray-tracing with a 1080p resolution at 60fps.

The question is, is it worth upgrading your existing GPU in favor of the RTX 3050?


What’s The Big Deal?

Looking at the RTX 3050’s predecessors, Nvidia shows us how the card performs with ray tracing and DLSS enabled compared to the GTX 1650 and GTX 1050.

rtx 3050 performance comparison to the gtx 1650 and gtx 1050
Image Credit: Nvidia

The issue is neither the GTX 1650 nor GTX 1050 can run ray tracing or DLSS. Thus, the results are rendered pretty useless since there’s not really a comparison.

However, at a time when GPU prices are 50 to 100% more than the RRP, a budget graphics card like the Nvidia GeForce RTX 3050 is a welcome breath of fresh air, especially as it offers a hefty increase in performance.

1. Increased Multiprocessors

Built using Nvidia’s Ampere architecture, the RTX 3050 comes with 20 streaming multiprocessors and 2,560 CUDA cores, a massive increase from the GTX 1650’s 14 streaming multiprocessors and 892 CUDA cores.

MAKEUSEOF VIDEO OF THE DAY

Users looking to invest in the RTX 3050 will be pleased to know the power drawn from the GPU sits comfortably at 130W. Yes, it’s more than the AMD Radeon RX 6500 XT and other similar GPUs, but the performance boost is worth it.

2. Ray Tracing

minecraft-rtx-on-2048
Image Credit: Nvidia

For those looking to upgrade their graphics card, one of the main reasons for doing so is to invest in ray tracing. Rendering light and shadows to be more realistic, ray tracing is one of the most sought-after technologies in PC gaming.

Advanced rendering techniques like ray tracing are particularly appealing since the photo-realism in games produced by this technology is almost unbeatable. However, the main drawback is that there are only a limited number of games that support ray tracing, so if you’re investing in the RTX 3050 because of this, you may be disappointed.


3. DLSS

With more powerful GPUs out there, it’s difficult to say if the RTX 3050 is worth investing in solely for ray tracing. In fact, DLSS is the honorable mention among Nvidia’s 30-series GPUs, boosting performance in games and achieving 1080p at 60fps for longer without sacrificing visuals.

NVIDIA DLSS (Deep Learning Super Sampling) is groundbreaking AI rendering technology that increases graphics performance using dedicated Tensor Core AI processors on GeForce RTX™ GPUs.

Especially important for lower-end graphics cards, DLSS offers an increase in frame rate without limiting immersion elsewhere. Essentially, you’re getting more bang for your buck from this affordable graphics card; higher resolution gaming with higher frame rates.

Not to mention, the RTX 3050 comes with Nvidia Reflex—technology that reduces latency in competitive games, which is especially useful for multiplayer titles.


4. Low Temperatures

The RTX 3050 maintains lower temperatures and uses less power while using the same cooler as the RTX 3060. Furthermore, it offers more thermal headroom if you plan to overclock it.

You can expect to see a range of 60 to 62 degrees Celsius, even at 1440p. While the GPU’s fan speed isn’t anywhere near close to that of the GTX 1660 Super, you can expect it to create more noise than other budget graphics cards.

Even so, a mid-range GPU capable of sitting comfortably at 1440p with DLSS is worth the small hike in fan noise.

5. Gaming at 1440p

If you can look past the state of the graphics card market, the RTX 3050 is an impressive upgrade. Even with ray tracing on and DLSS disabled, you can play many AAA titles and get over 40fps. Bump this up further by playing games without ray tracing but DLSS enabled, and you can expect over 140fps.


Although it’s marketed as a 1080p graphics card, the RTX 3050 can happily run on many 1440p displays. Those with an AMD RX 6500 XT will therefore benefit from switching out to the RTX 3050 if 1440p gaming is something you’d like to test the waters in (or for that matter, even just decent 1080p gaming, such is the performance deficit of the RX 6500 XT).

Stretching its performance, Nvidia’s GeForce RTX 3050 is capable of playing almost any game in your library. Without sacrificing visuals, enjoying high settings is somewhat of a breeze for this GPU, especially if you can get it at a decent price.

Why It’s Worth Upgrading to the Nvidia RTX 3050

If the GPU market was that of previous years, you might think the RTX 3050 doesn’t improve much on the GTX 1660 Super at a similar price. However, it’s not possible to think like that anymore, not at least for some time.

Seeing Nvidia’s GeForce RTX 3050 as it is now, it’s definitely worth considering—more Streaming Multiprocessors, increased CUDA cores, ray tracing, DLSS, and possible gaming at 1440p, all while maintaining low temperatures.

However, if you’ve got the budget and your eye on the RTX 40-series, it’s probably more sensible to sit out this generation of GPU.


Listed video cards
Nvidia RTX 3050 vs. AMD RX 6500 XT: What’s the Best Budget GPU?

Nvidia and AMD announced two cheaper cards at CES 2022, but how do they stack up against each other?

Read Next


About The Author



Source link

Leave A Reply

Your email address will not be published.